N: New I: Improvement F: Fix S: Security
-----------------------------------------------------------------
FIREDAEMON FUSION 8 PRE-RELEASE
THIS VERSION IS IN ACTIVE DEVELOPMENT
WORKS WITH FIREDAEMON PRO 6 ONLY
PLEASE READ THE RELEASE NOTES:
https://kb.firedaemon.com/support/solutions/articles/4000211956
-----------------------------------------------------------------
* 8.0.1-8.0.2 build here November 2024
N FireDaemon Pro 6 compatibility release
N Toolchain update
I Minor text and consistency improvements
-----------------------------------------------------------------
FIREDAEMON FUSION 7 PRODUCTION STABLE
THIS VERSION IS END OF DEVELOPMENT (BUGFIX ONLY)
WORKS WITH FIREDAEMON PRO 5 ONLY
PLEASE READ THE RELEASE NOTES:
https://kb.firedaemon.com/support/solutions/articles/4000194231
-----------------------------------------------------------------
* 7.1.11 build here November 2024
I Update to OpenSSL 3.4.0
I Updated Hanko Passkey Forms to v1.1.0 (n.b. login communication endpoints for < v1.0 will cease to work by end January 2025)
F Windows service dependencies were broken and were not listed properly
-----------------------------------------------------------------
* 7.1.9-7.1.10 build here September 2024
I Update to OpenSSL 3.3.2
I Improved installation when using the built-in administrator account
F Could not update service accounts
F Label for input field "Dialog Check Frequency" was incorrect
F Crash when updating the FireDaemon Pro license
F FireDaemon Pro service with a non-existent dependency would cause an error
-----------------------------------------------------------------
* 7.1.7-7.1.8 build here April 2024
I Update to OpenSSL 3.3.0
F Fonts missing from the installer
F Updated various HTML elements for modern browsers only
F Could not browse for a file or folder
F Incorrect NTFS ACLs emitted by the installer
F CLI crashed after every command
-----------------------------------------------------------------
* 7.1.6 build here March 2024
I Minor CLI text output changes
I Better error message when the service list load fails
I Installer checks the product certificate chain
I Installer forces upgrade into the same install directory
F Crash when completing version checks
F Mismatch libxml2 dependency
F APPCRASH forces WER DMP to be created
-----------------------------------------------------------------
* 7.1.5 build here November 2023
I Update to OpenSSL 3.1.4
I Minor text change in Processor Scheduling section
I Minor text change in log messages
I Restyled Hanko Passkey Login Form
S Updated SBoM (see System Information -> Credits)
F Updating an existing local user did not work
-----------------------------------------------------------------
* 7.1.4 build here October 2023
I Update to OpenSSL 3.1.3
I Updates and corrections to Fusion API documentation
F Creating a new service failed when the tag was empty
-----------------------------------------------------------------
* 7.1.3 build here July 2023
I Added Process column to the list of FireDaemon services
F Service Status and PID were not being displayed properly
-----------------------------------------------------------------
* 7.1.2 build here July 2023
I License information can be copied / pasted into license dialog
F Fusion did not work on versions prior to Windows 10/2016 due to log4cxx 1.1.0 compatibility issue
F Licence key had to be applied twice to "stick"
-----------------------------------------------------------------
* 7.1.1 build here May 2023
I Update to OpenSSL 3.1.1
I Removed dependency on Visual Studio C++ Runtime
I Updated online documentation URL
F Hanko Passkeys user login text alignment
-----------------------------------------------------------------
* 7.0.0-7.1.0 build here May 2023
N 64-bit only
N Hardware-based code signing
N License information hidden from regular users
N Incorporates OpenSSL 3.1
N Passwordless authentication via Hanko
N Advanced Installer MSI installer
-----------------------------------------------------------------
FIREDAEMON FUSION 6.6 FINAL
THIS VERSION IS END OF LIFE. PLEASE UPGRADE
WORKS WITH FIREDAEMON PRO 4.6 ONLY
PLEASE READ THE RELEASE NOTES:
https://kb.firedaemon.com/support/solutions/articles/4000123183
-----------------------------------------------------------------
* 6.6.6 build here November 2022
I OpenSSL 1.1.1s update
I Toolchain update
I Digital certificate update
-----------------------------------------------------------------
* 6.6.5 build here July 2022
I OpenSSL 1.1.1q update
I InstallShield installer update
-----------------------------------------------------------------
* 6.6.4 build here May 2022
I OpenSSL 1.1.1o update
-----------------------------------------------------------------
* 6.6.2-6.6.3 build here February 2022
N Support for TLS private key with elliptic curve
I Updated VC Runtime
I Fusion only supports "modern browsers" when CORS is enabled
F CORS support stopped working due to browser changes in SameSite cookie handling
-----------------------------------------------------------------
* 6.6.1 build here January 2022
F x86 installer failed to install / upgrade
F License type correctly displayed (e.g. perpetual)
-----------------------------------------------------------------
* 6.6.0 build here December 2021
I Correctly report Windows 11 and Server 2022
I OpenSSL 1.1.1m update
I log4cxx 0.12.1 update
I libxml 2.19.12 update
F Memory leak on each connection
F Could not create a console program as a service via web UI
F Installer dialog control correction
-----------------------------------------------------------------
* 6.5.27 build here May 2021
F Correct handling of origin in 'multi-hop' server scenarios and remote node access
-----------------------------------------------------------------
* 6.5.25/26 build here May 2021
N Admin password must be set during new installs
F Switching back and forth between SSL / non-SSL didn't work
F OpenSSL privilege escalation (thanks Xavier :)
F Couldn't login if CORS enabled
F CSRF checks when reverse proxy's connection protocol differs
F Couldn't set debug log level
F Couldn't connect to remote nodes
-----------------------------------------------------------------
* 6.5.24 build here March 2021
N Sectigo Authenticode Digital Certificate
I OpenSSL 1.1.1k update
-----------------------------------------------------------------
* 6.5.23 build here March 2021
I OpenSSL 1.1.1j update and other security related improvements
I License expiry details displayed for all license types
F License dialog crash when licensing via GUI based dialog
-----------------------------------------------------------------
* 6.5.22 build here January 2021
F Crash when FireDaemon Pro was missing
-----------------------------------------------------------------
* 6.5.21 build here December 2020
N User guide URLs
I Servicing release (VC++ 16.8)
-----------------------------------------------------------------
* 6.5.20 build here November 2020
I Compatibility updates. Use with FireDaemon Pro 4.5.25 or later only
I Built using latest OpenSSL 1.1.1i
-----------------------------------------------------------------
* 6.5.19 build here November 2020
N Can reset user passwords via command line
F List ordering didn't work
-----------------------------------------------------------------
* 6.5.18 build here October 2020
N Support for SSL / TLS CA chain files
N Verification of SSL / TLS certificate and key
I Reordered passwords fields when editing users
I User role and assigned service rights consistency
F Section access didn't work
-----------------------------------------------------------------
* 6.5.17 build here October 2020
F Editing users was broken
F Crash in FusionControl when specifying incorrect parameters
F Re-arranged ZIP file folders in OEM distribution
F Including missing DLLs in OEM distribution
-----------------------------------------------------------------
* 6.5.16 build here September 2020
N Dropped support for IE11 - use Edge instead
I Include OpenSSL license in distribution
I TLS 1.2 and 1.3 plus strong ciphers enabled by default
I Changes to SameSite cookie settings = CORS over HTTPS only
I Updated README
F FOUC when editing a user
-----------------------------------------------------------------
* 6.5.15 build here July 2020
F Stop All / Restart All services incorrectly reported
-----------------------------------------------------------------
* 6.5.14 build here June 2020
I UI text decorations and tooltips align with Pro 6.5
F Application of invalid license dropped product back into trial mode
F Could not load some system services with a recovery command line
F Alignment of sibling fields
F Days of week schedule dialog didn't work
F Couldn't delete schedules
-----------------------------------------------------------------
* 6.5.12+6.5.13 build here April 2020
N Support for IPv6
N HTTP to HTTPS redirect message
N Ability to accept connections on multiple IP addresses
N Display new processes status in regard to forking primary processes
I Includes OpenSSL 1.1.1h
F CORS support was broken
F OEM variant correctly displays configured product name in page title
-----------------------------------------------------------------
* 6.5.11 build here February 2020
N Upgraded 3rd-party Javascript dependencies
N Summary for yearly duration schedules
N OEM variant with adjustable ProductName and logo
N Friendlier message when accessing Fusion via HTTP instead of HTTPS
N 64-bit version!
F Move table sort icons for right-aligned columns to the right
F Utilise full Unicode capabilities
F Fix crash happening on multicore (>32 processors) with only one processor group under Wow64
F Deleting a service from the editing dialog works again
F Check whether service to update exists to prevent crashing the Fusion webserver
F Fix broken schedule summary display after editing a schedule
F Fix saving a new service when Event Program delay is empty
F Correct description of the FireDaemon Fusion 64-bit executable
F Configured product name now appears in web page titles
-----------------------------------------------------------------
FIREDAEMON FUSION 6 PRODUCTION STABLE
WORKS WITH FIREDAEMON PRO 4 ONLY
PLEASE READ THE RELEASE NOTES:
https://kb.firedaemon.com/support/solutions/articles/4000123183
-----------------------------------------------------------------
* 6.0.34 build here October 2019
F Registration Information dialog didn't launch from the Windows Start menu
F Licensee information not displayed correctly if contained HTML special characters
F Installer dialog display issues when DPI >= 250%
-----------------------------------------------------------------
* 6.0.33 build here April 2019
N Updated EULA and README
F Table sort icons for right-aligned columns moved to the right
F Additional error and warning notifications when changing own profile
-----------------------------------------------------------------
* 6.0.32 build here January 2019
I Includes OpenSSL 1.1.0k w/o zlib
F Saving an automatic service would reset startup type to manual
F Editing users or system services would sometimes yield Unknown Fatal Error
F Services with special characters could not be opened
-----------------------------------------------------------------
* 6.0.31 build here October 2018
N Support for Server 2019
N Can apply license key information during silent install
-----------------------------------------------------------------
* 6.0.30 build here September 2018
I Made text in Lifecycle options clearer
F 'Upon Fail' lifecycle option should use ProductShortName
-----------------------------------------------------------------
FIREDAEMON FUSION 5 PRODUCTION STABLE
THIS VERSION IS END OF LIFE. PLEASE UPGRADE
WORKS WITH FIREDAEMON PRO 3 ONLY
PLEASE READ THE RELEASE NOTES:
https://kb.firedaemon.com/support/solutions/articles/4000123181
-----------------------------------------------------------------
* 5.0.16 build here July 2016
N Product runs for 30-day in trial mode and then requires a license key
I Product completely overhauled internally
I Rebuilt on Visual Studio 2015
I SSL functionality and ciphers completely up to date
I Updated InstallShield Installer
I Updated Users Guide
I Updated SSL Encryption Guide
I Updated API Guide
F Works with 32-bit and 64-bit version of FireDaemon Pro 3.13
or later only
-----------------------------------------------------------------
* 2013.12.256.0 build here December 2013
I Updated API documentation
F Regular Users could access Quickstats and Options if the URL
was known
F Empty SSL password from a remote node couldn't be decoded
F SSL key path growing recursively in the internal session
-----------------------------------------------------------------
* 2013.10.251.0 build here October 2013
N SSL passwords AES256 hashed in FusionServices.xml
I Minor UI and installer verbiage tweaks
I Removed redundant HTML images
F Default SSL certificate was expired
F Possible to set all admin accounts to user-level effectively
locking you out of admin access
-----------------------------------------------------------------
* 2013.09.247.0 build here September 2013
N Works with FireDaemon Pro v3.6 only
N Dropped support for XP and 2003
N Support for Windows 8, 2012, 8.1, 2012 R2
N Can connect to multiple remote machines
N Remote machine heartbeating
N Support for SSL key passphrases
N Overhauled IP address binding
N Fully documented JSON API
I Removed all the RSS feeds
I Complete overhaul of user access controls and rights
I Improved UI to support all recent Apple IOS and Google
Android tablets and phones
I Default port now 20604
I Improved support for third party commercial SSL keys
F More fixes and improvements than you can poke a stick at
-----------------------------------------------------------------
* 2011.05.114.0 build here May 2011
N Works with FireDaemon Pro v3.5 only
N Full unicode (multi-language) support
N Fine grained user access control to services
N Fine grained Fusion service control (IP, ports, SSL, etc.)
I Can hide product version string
I More detail in Quick Stats
I Various cosmetic improvements
I Multi-user access improvements
I Better logging
F Double quotes not displaying properly in System Services
F Quick Stats reported some Windows 7 variants incorrectly
F Swap and Swap Used were the same value
F FireDaemon and Windows service definition update button
was broken
F Browsing protected directories failed
F Browsing directories with non-English characters failed
-----------------------------------------------------------------
* 2010.07.95.0 build here (Beta) July 2010
I Bulk start/stop of FireDaemon services - better logging
and notifications
I Refactoring of backend Javascript
F Crash in XML parser
-----------------------------------------------------------------
* 2010.06.93.0 build here (Beta) June 2010
N Remote file browser
N CPU bindings dropdown
I Path is copied down to Working Directory when choosing
an executable via the file browser
F Quickstats displays incorrect number of sockets
F Services RSS lists displaying incorrect entries
F Dialog log file StdErr log file paths not saved correctly
F Incorrect version of Windows 7 reported in QuickStats
-----------------------------------------------------------------
* 2010.04.86.0 build here (Beta) April 2010
F Users preference for All Services would be lost when saved
F Capture Stdout in File would always gets set to ToStdout
-----------------------------------------------------------------
* 2010.04.85.0 build here (Beta) April 2010
F If a user was logged on and they were deleted they could
still perform actions until they logged off
F Short name not duplicated in display name
F Pre/Post service executable field missing
F Edit FireDaemon service tab order
F When multiple services are checked and edit is clicked
only the first service is edited
-----------------------------------------------------------------
* 2010.04.84.0 build here (Beta) April 2010
N You can specify how many services are listed in the
services grid (15, 50, 100)
F Any value could be entered in CPU Bindings
F When creating a new service Service Display Name is
automatically filled in when you click on the field
-----------------------------------------------------------------
* 2010.03.82.0 build here (Beta) March 2010
I All browser popups replaced with jQuery dialogs
F When creating a user and not assigning any services, then
a warning is displayed
-----------------------------------------------------------------
* 2010.03.81.0 build here (Beta) March 2010
F Cannot uninstall disabled services
F Endless loop when attempting to uninstall services and
none selected
F Crash when badly formed/invalid SSL certificate supplied.
Fusion will fail gracefully if the certificate in this
situation and revert to HTTP
-----------------------------------------------------------------
* 2010.03.80.0 build here (Beta) March 2010
N Initial releaseText